Switch RF Input

Set the port number of an Antenna Multiplexer Device. Both the set and query command take a parameter specifying a port number. The query version returns 1 if the specified port is currently set, otherwise it returns 0. Avaliable number of ports on the antenna multiplexer device is determined by model number and option number of the system.

<number>

1

Switch RF Input Recall Setup Mode

Sets whether the port specific setup will be recalled when switching the port number of the Antenna Multiplexer Device. Note that this setting is not persistent through a power cycle, but keeps the value through recalling user setup files or user measurement files. When recalling a user setup in the STATic mode, the setup of the Antenna Mux value in the setup file will be used as the static port setup when toggling Antenna Mux ports. The query returns either REC or STAT. If the setting is set to REC, the instrument will recall the port specific setup during every port change of the Antenna Multiplexer Device. A STAT setting value means that the port setup will not change when changing the port of the Antenna Multiplexer Device.

<RECall|STATic>

RECall

RECall|STATic

 

Query RF Input Switch

Query the instrument for the state of the an Antenna Multiplexer Device. The response is in the form of a SCPI channel list (i.e. IEEE definite length arbitrary block response ’#AX<block>’, where A is the number of digits in X, X is the number of bytes in <block>, and <block> is the ASCII representation of the currently closed port).Avaliable number of ports on the antenna multiplexer device is determined by model number and option number of the system.